Feature
The above specifications and values are based on Gang-type CNC lathe.
(std.) Hydraulic cylinder coolant collector
(std.) Chip collection bucket
(std.) Syntec controller EZ-3
(std.) LNC controller 516i
(opt.) 1HP powerful coolant pump
(opt.) 5 inch 3-jaws hydraulic chuck
(opt.) 8-position servo turret
(opt.) cutting coolant system (Inculding 85L coolant tank and 0.25HP pump)
(opt.) Belt break detection device of spindle
(opt.) Hydraulic cylinder detection device with coolant collector
(opt.) cutting coolant system (Inculding 85L coolant tank and 0.25HP pump)
Video
HC-30N U-type SPM
Auto loading / Unloading
HC-30N U-type SPM
Auto loading / Unloading
HC-30N U-type SPM
Auto loading / Unloading
Specification
| MODEL |
Unit |
HC-30N-U |
| Swing over cross bed |
mm |
250 |
| Max. turning dia | mm | Ø110 |
| Max. turnung length | mm | 100 |
| Spindle motor | kw | 3.75 (5.5 opt) |
| Spindle rotating speed | rpm | 6000 |
| X-axis travel | mm | 300 |
| Z-axis travel | mm | 200 |
| X/Z rapid travel speed | m/min | 20 |
| X/Z-axis servo motor | KW | 1 |
| X-axis Ballscrew | Ø25 pitch10 | |
| Z-axis Ballscrew | Ø28 pitch8 | |
| Bore of spindle | mm | Ø33 |
| Collet type | C32 | |
| Max. bar feeding dia | mm | Ø30 |
| O.D. turning tool size | mm | 口20 |
| I.D. turning tool size | mm | Ø20 |
| Cutting coolant pump | HP | 1 |
| Approx. net weight | KGS | 1750 |
| Approx. machine size(L×W×H) | mm | 1500x1550x1600 |
The above specifications and values are based on Gang-type CNC lathe.
If there are other optional devices, the specifications and values will be different.
All specifications, dimensions and design characteristics shown in this website are subject to change without not
Accessory
Standard Accessories
Base leveling block
Auto lubrication system
Gang type tool plate
Tool holder for inner hole (ID Ø20) 3pcs
YB20 Collet : 1pc
Collet : 1pc
Tool holder for inner hole (IDØ20)YB20 Collet : 2 pcs
Tool holder bush
(IDØ6, 8, 10, 12, 16, ODØ20)per pc/total : 5 pcs
A2-4 spindle
C-32 collet
Lighting device
Tools and tool box
Optional Accessories
SYNTEC EZ-11TA controller
Powerful coolant pump 1 HP
Tool holder bush (IDØ6,8,10,12,16 / ODØ20) 1pcs / each
Tool holder 20□(Upper/Lower )
No-material alarm indicating lamp
Chip collection bucket
Base leveling block
Auto lubrication system
Gang type tool plate
Tool holder for inner hole (ID Ø20) 3pcs
YB20 Collet : 1pc
Collet : 1pc
| Title | Standard accessories | Optional accessories | N/A |
| A2-4 spindle |
● |
||
| C-32 collet | ● | ||
| Lighting device | ● | ||
| Tools and tool box | ● | ||
| Base leveling block | ● |
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.