Turning & Milling Complex Type CNC Lathe
MODEL | HC-30 |
---|---|
Swing over cross bed(mm) | 300 |
Max turning dia(mm) | Ø180 |
Max turning length(mm) | 150 |
X-axis travel(mm) | 350 |
Z-axis travel(mm) | 250 |
X rapid travel speed(m/min) | 20 |
Z rapid travel speed(m/min) | 20 |
Spindle rotation speed(rpm) | 50-6000 |
Bore of spindle(mm) | Ø33 |
Max. bar feeding dia.(mm) | Ø30 |
O.D. turning tool size(mm) | 口20 |
I.D. turning tool size(mm) | Ø20 |
Coolant tank volume(L) | 120 |
Powerful coolant pump (HP) | 1 |
Collet chuck | 163E |
Spindle motor(KW) | 3.75 (5.5 opt) |
X、Z-axis servo motor(KW) | 1 |
Hydraulic turret(POS.) | 8 |
Approx. machine net weight(KGS) | 2100 |
Approx. machine size(L×W×H)(mm) | 2450×1550×1950 |
The above specifications and values are based on Gang-type CNC lathe.
If there are other optional devices, the specifications and values will be different.
● Standard accessories ○ Optional accessories - N/A
MODEL | HC-30 |
---|---|
163E Collet | ● |
5" Hydraulic chuck | ○ |
Lighting device | ● |
Tools and tool box | ● |
Coolant system and chip basket tank | ● |
Powerful coolant pump 1HP | ● |
Base leveling block | ● |
Tool holder for inner hole (I.D.Ø20) | ● |
Tool base for inner hole (I.D.Ø20) | ○ |
No-material alarm indicating lamp | ● |
Tool holder bush (I.D.Ø6,8,10,12,16 / O.D.Ø20) | ● |
Gang type tool plate | ● |
Auto lubrication system | ● |
Upper tool holder 20口/Lower tool holder 20口/Twin tool holder 20口 | ● |
Voltage stabilizer | ○ |
Transformer | ○ |
Track type electrical chip conveyer | ○ |
Oil mist recycle device | ○ |
Closed air cooler | ○ |
8-Position hydraulic turret | ○ |
Bar-puller (Auto link) | ○ |
CE specifications | ○ |
Finished-parts collecting device | ○ |
Finished-parts collecting device and conveyor belt | ○ |
Y-axis side milling device(4-tool)(ER-16) | ○ |
Three shaft drilling & tapping device(B-axis) | ○ |
C-axis function with disk brake system | ○ |
Single shaft side milling device-Top (ER-25) | ○ |
Single shaft vertical type milling device (ER-20) | ○ |
Single shaft side milling device-Below (ER-20) | ○ |
Syntec 22TA controller | ● |
Upper tool holder 20口/Lower tool holder 20口
Tools and tool box
Tool holder for inner hole(IDØ20)
Tool holder bush(IDØ6,8,10,12,16~ODØ20)
Coolant system and chip basket tank with 1/4HP pump
Bar-puller (Autolink)
Closed air cooler
1HP powerful coolant pump
Single-shaft side milling device-below(ER-20)
No-material alarm indication lamp
Base leveling block
Twin tool holder 20x20口
Voltage stabilizer
Voltage stabilizer & Transformer
8-Position hydraulic turret
163E Collet~161E Collet
CE specifications
C-axis function with disc brake system
C-axis function with disc brake system
Fanuc Oi Mate TC controller
Y-axis side milling device(4-tool)ER-16
Single-shaft side milling device-top(ER-20、ER-25)
Automatic parts collector and conveyor belt
Quartz illuminator
Auto lubrication system
Oil mist recycle device
Direct connection collet chuck
Syntec 900T all in one controller
Single-shaft vertical milling(ER-20)
Parts collecting device
Track type electrical chip conveyer
Three-shaft end face drilling & tapping device(ER-16)
Twin-shaft end face grinding(ER-20)
Gang type tool plate
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.