Turning & Milling Complex Type CNC Lathe
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
MODEL | HCP- 42 (New Type) |
---|---|
Swing over cross bed(mm) | 300 |
Max. turning dia(mm) | Ø250 |
Max. turning length(mm) | 150 |
Hydraulic chuck(inch) | 6" |
Bore of spindle(mm) | Ø45 |
Max. bar feeding dia(mm) | Ø42 |
X-axis travel(mm) | 365 |
Z-axis travel(mm) | 395 |
X-axis rapid travel speed(m/min) | 25 |
Z-axis rapid travel speed(m/min) | 25 |
Spindle rotating speed(rpm) | 50-6000 |
O.D. turning tool size(mm) | 口20 |
I.D. turning tool size(mm) | Ø20 |
Coolant tank volume(L) | 110 |
Cutting coolant pump(HP) | 1 |
Collet type | C44 / 173E |
Spindle motor | 3.75 (5.5 opt) |
X/Z-axis servo motor(KW) | 1 |
Guideway type | Linear guideway |
Approx. net weight(KGS) | 2500 |
Approx. machine size (L×M×H)(mm) | 2100×1700×1850 |
The above specifications and values are based on Gang-type CNC lathe.
If there are other optional devices, the specifications and values will be different.
● Standard accessories ○ Optional accessories - N/A
MODEL | HCP- 42 (New Type) |
---|---|
A2-5 spindle | ● |
6" 3-jaw Hydraulic Chuck or Collet Chuck (choose one) | ● |
Soft Jaw or 173E collet (choose one) | ● |
Lighting device | ● |
Tools and tool box | ● |
Coolant system and chip basket tank | ● |
Powerful coolant pump 1HP | ● |
Base leveling block | ● |
Tool holder for inner hole (I.D.Ø20) | ● |
Tool base for inner hole (I.D.Ø20) | ○ |
No-material alarm indicating lamp | ● |
Tool holder bush (I.D.Ø6,8,10,12,16 / O.D.Ø20) | ● |
Gang type tool plate | ● |
Auto lubrication system | ● |
Upper tool holder 20口/Lower tool holder 20口/Twin tool holder 20口 | ● |
Tool spacer (up / down) | ○ |
Voltage stabilizer | ○ |
Transformer | ○ |
Finished-parts collecting device | ○ |
Track type electrical chip conveyer | ○ |
Oil mist recycle device | ○ |
Closed air cooler | ○ |
8-Position hydraulic turret | ○ |
Bar-puller (Auto link) | ○ |
CE specifications | ○ |
Finished-parts collecting device | ○ |
Finished-parts collecting device and conveyor belt | ○ |
Y-axis side milling device(4-tool)(ER-16) | ○ |
Y-axis side milling device(4-tool)(ER-20) | ○ |
Y-axis side milling & end face milling device(8-tool)(ER-20) | ○ |
Three shaft drilling & tapping device(B-axis) | ○ |
C-axis function with disk brake system | ○ |
Single shaft side milling device-Top(ER-25) | ○ |
Single shaft vertical type milling device(ER-20) | ○ |
Single shaft side milling device-Below(ER-20) | ○ |
Oil skimmer | ○ |
Syntec 22TA controller | ● |
Fanuc controller | ○ |
Automatic tool measurement for turret | ○ |
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.